Installation Guidelines - Wireless Solution W-DMX TRX Implementation Manual

9 Installation Guidelines

The PCB is installed on the carrier board.
The box is opened by unscrew 4 screws from the bottom of the unit, the screws is hidden by
rubber feet's.
The electrical installation includes two parts:
Push out the plug for the antenna connector and then fasten the antenna cable in the chassis
Connect the MCX connector on the antenna cable on the radiocard
Revision 4 Wireless Solution Sweden Sales AB
Stureparksvägen 7 – 451 55 Uddevalla – Sweden
Author: Anders Zellén
+46 522 511 511 Tel. +46 522 440 885 Fax.
Wirelessdmx.com sales@wirelessdmx.com
18(23) 14/11/2014