Wireless Solution W-DMX TRX Implementation Manual page 19

Connect the pin header on the radiocard to the carrier board and fixate with four screws.
To close the unit, close the LID and fasten the 4 screws in the bottom, put back the rubber
feet.
Connect the antenna to the SMA connector on the box
Finally when the installation is completed, take the label
"Contains FCC ID: NY2-WDMXTRXDB" and fasten it on the product label on the bottom of
the unit.
Revision 4 Wireless Solution Sweden Sales AB
Stureparksvägen 7 – 451 55 Uddevalla – Sweden
Author: Anders Zellén
+46 522 511 511 Tel. +46 522 440 885 Fax.
Wirelessdmx.com sales@wirelessdmx.com
19(23) 14/11/2014