Mechanical Dimensions; Pro L6 Model; Antennas - Wireless Solution W-DMX TRX Implementation Manual

2 Mechanical Dimensions

Transceiver cards are equipped with a metal shield over the radio to conform to
international standards. The receiver cards do not emit any significant amount of RF
energy and are thus not equipped with this shield.
Auto Cad DXF files with file with relevant dimensions are available on request from
Wireless Solution. The total height of Pro cards is 11 mm, the highest point it the pin
header, take into consideration the receptacle that you choose.

2.1 Pro L6 model

S2, S3 and S4 is M3 holes
S1 is a slot 3.9 x 3.1 mm
X2 is the antenna connector

3 Antennas

Note that several aspects, including physical placement, should to be considered with
external antennas.
W-DMX installations use W-DMX supplied RP-SMA cable and ship with the
standard dual band indoor 4dBi antenna.
Revision 4
Author: Anders Zellén
8(23)
Wireless Solution Sweden Sales AB
Stureparksvägen 7 – 451 55 Uddevalla – Sweden
+46 522 511 511 Tel. +46 522 440 885 Fax.
Wirelessdmx.com sales@wirelessdmx.com
14/11/2014