Specifications; Electrical Specifications - Wireless Solution W-DMX TRX Implementation Manual

The radio card is detected by signal level on pin J1.5 that is driven to GND or 5V depending
on card status, normal this pin is floating to ~2.5V. Therefore no further installation is needed.
By this detection, the host product is initialized for use of the radiocard.

10 Specifications

Exceeding the values specified in the tables below will cause permanent damage and void any
warranty.

10.1 Electrical Specifications

Parameter
DC Supply
5V DC input
LED Pin output source current
DMX interface
Maximum number of units on the DMX/RS-
485 bus
1
DMX data rate
ESD protection, human body model
RF characteristics (5.8GHz)
Maximum Output Power
Actual limit depends on local regulations
Frequency Range of operation
Channel bandwidth
Sensitivity at 0.1% BER
Range with standard 4dBi antenna (measured)
1
Slew rate limited for minimum of EMI in un-terminated networks.
Revision 4
Author: Anders Zellén
20(23)
Min. Typ. Max.
4.9 5.0 5.1
20
As per the DMX Standard
250
None
- 27.0
- 500
5744 5821
1
-96
400
Wireless Solution Sweden Sales AB
Stureparksvägen 7 – 451 55 Uddevalla – Sweden
+46 522 511 511 Tel. +46 522 440 885 Fax.
Wirelessdmx.com sales@wirelessdmx.com
Unit
V
mA
kbps
kV
dBm
mW
MHz
MHz
dBm
m
14/11/2014