Section 2 General Information; Safety Information; Warning Labels - Hach TitraLab User Manual

Section 2
2.1

Safety information

2.1.1

Warning labels

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety
information.
This symbol may be found on an enclosure or barrier within the product and indicates a risk of electrical shock
and/or death by electrocution.
Electrical equipment marked with this symbol may not be disposed of in European domestic or public disposal
systems after 12 August 2005. In conformity with European local and national regulations, European electrical
equipment users must now return old or end-of life equipment to the manufacturer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment manufacturer or supplier for instructions on how to
return end-of-life equipment, manufacturer-supplied electrical accessories, and all auxiliary items for proper
disposal.
General information
Please read the entire user manual carefully before the equipment is unpacked, set up or
put into operation. Pay attention to all danger and warning statements. Failure to do so
could result in serious injury to the operator or damage to the equipment.
To make sure that the protection provided by this instrument is not impaired, do not use or
install this instrument in any manner other than that specified in these operating
instructions.
Indicates a potentially or imminently hazardous situation that, if not avoided, results in death or
serious injury.
Indicates a potentially or imminently hazardous situation that, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation that may result in minor or moderate injury.
Indicates a situation that, if not avoided, could result in damage to the instrument. Information that
requires special emphasis.
Note: Information that supplements points in the main text.
Read all labels and tags attached to the instrument. Failure to do so may result in personal
injury or damage to the instrument. For symbols applied to the instrument, corresponding
warnings are provided in the user manual.
D A N G E R
WA R N I N G
C A U T I O N
N O T I C E
7