Yale SR-310 User Manual page 15

Changing Batteries
•
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
Door/Window Contact Battery Change
(SE) Batteribyte - (DK) Batteriskift.
When the battery is low the LED will light up when the door/window is opened.
Note: Door/Window Contact case tamper conditions are also indicated by a lit LED, check the tamper before
changing the battery.
CHANGE
SR-KP
BATTERY
SR-KP
SR-KP
To change the battery:
1. Disarm 2. Unscrew 3. Remove cap
SR-DC
(22)
SR-KP
SR-DC top case.
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
SR-DC
(SE) Batteribyte - (DK) Batteriskift.
Please ensure battery
is inserted correctly.
SR-PC
SR-DC
PIR Battery Change
2 x 1.5v AA
SR-PC
SR-PC
When the battery is low the LED will flash when any motion is detected. The batteries are changed as
follows:
SR-PC
EF-PIR SR-PIR / PETPIR
3 x 1.5v AAA
Alkaline
SR-KP
1. Disarm 2. SR-PIR / PETPIR 3. 3. Insert
SR-PIR / PETPIR
Unscrew
SR-PIR / PETPIR Remove new
& remove Batteries Batteries
top case
SR-DC
PIR Camera Battery Change
1. Disarm 2.
3. Remove old & insert
SR-PC
Unscrew
new Batteries
& remove
top case
Please be careful
when removing case
as cable is very
delicate.
28
SR-PIR / PETPIR
CHANGE
BATTERY
BATTERY
CHANGE
BATTERY
CR 2032
CR 2032
CR 2032
CR 2032
CR 2032
CR 2032
CR 2032
4. Remove battery 5. Insert new 6. Refit.
battery
2 x 1.5v AA
CR 2032
2 x 1.5v AA
2 x 1.5v AA
CHANGE
BATTERY
3 x 1.5v AAA
CR 2032
3 x 1.5v AAA
3 x 1.5v AAA
Ensure tamper spring is fully
depressed when re-fitting the PIR to
the back case. If this has not been
4. Refit. CR 2032
done correctly this will be indicated by a
flashing LED on the PIR.
2 x 1.5v AA
Alkaline
4. Refit.
3 x 1.5v AAA
Changing Batteries
•
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
PIR Video Camer Battery Change
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
3 x 1.5v AA
(Lithium)
1. Disarm
2. Unscrew
& remove
top case
SR-PVC
3 x 1.5v AA
(Lithium)
Key Fob Battery Change
SR-PVC
When the battery is low the LED will glow dimly when any key is pressed. The battery is changed as follows:
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
SR-KF
(SE) Batteribyte - (DK) Batteriskift.
(22)
2. 3.
1.
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
Unscrew &
Disarm
SR-KF Remove
(SE) Batteribyte - (DK) Batteriskift.
remove
& replace
battery
Press any key and check that the LED lights. If the LED lights the new battery installation is successful.
Key Pad Battery Change
SR-SD
SR-SD
When the battery is low the LED will flash when any key is pressed. The battery is changed as follows:
1. Disarm
2. Unscrew &
3. Remove old
SR-KP
remove cover
battery
SR-KP
SR-PB
SR-PB
Press a number key and check that the LED lights. If the LED lights the new battery installation is
successful.
SR-DC
SR-DC
(23)
3. Remove &
4. Refit.
replace Batteries
CR 2032
CR 2032
4.
Replace cover
3 x 1.5v AA
3 x 1.5v AA
CHANGE
BATTERY
CHANGE
BATTERY
CR 2032 CR 2032
CR 2032
CR 2032
4. Insert new 5. Replace cover.
battery (slot under
2 tabs) & click in
place.
CR 2032
CR 2032
2 x 1.5v AA
2 x 1.5v AA
(23)
29