Optelec Sentry+ User Manual page 13

Optelec
4. Connect the DVI-cable of your monitor to the as "monitor" labelled
connection of the control panel.
5. By using the delivered DVI-cable connect your computer to the as
"DVI In" labelled connection of the control panel.
6. Additionally you can use a footswitch. Connect this to the first left
connector at the rear of the control panel.
7. Connect the supplied power supply to the power connection at the
back of the control box and plug the power cord into a power
outlet. Your Sentry
English
+
[HD] is now ready for use.
+ +
Sentry / Sentry
Page 11
HD