Attaching The Display Head To A Mounting Device - HP HC270cr User Manual

6. Slide the stand out of the recess (3).

Attaching the display head to a mounting device

1. Remove the display head from the stand. See
2. Remove the four screws from the VESA holes located on the back of the display head.
3. Attach the mounting plate to the wall or swing arm of your choice using the four screws that you
removed from the VESA holes on the back of the display.
IMPORTANT:
wall or swing arm.
Follow the mounting device manufacturer's instructions when mounting the display to a
Removing the display stand on page 16.
Setting up the display 17