Attaching The Monitor To A Mounting Device - HP Z43 User Manual

Attaching the monitor to a mounting device

1. Remove the monitor stand. Refer to
2. Slide the hinge cover adapter plate onto the hinge on the back of the monitor and press until it clicks
into place.
3. To attach the monitor to a swing arm (sold separately), insert four screws through the holes on the
swing arm plate and into the mounting holes on the monitor.
To attach the monitor to other mounting fixtures, follow the instructions included with the mounting
fixture to ensure that the monitor is safely attached.
IMPORTANT:
wall or swing arm.
IMPORTANT:
degrees to portrait orientation.
14 Chapter 1 Getting Started
Removing the monitor stand on page
Follow the mounting device manufacturer's instructions when mounting the monitor to a
For optimal monitor performance and screen clarity, do not rotate the monitor 90
13.