Chapter 6 Control Head Legends And Safety Messages; Applying The Replaceable Control Head Legends; Figure 6.1 Installing The Control Head Labels - Federal Signal Corporation Pathfinder Installation And Maintenance Instructions Manual

CHAPTER 6
Control Head Legends and Safety Messages
To complete the installation, the kit includes:
A scored sheet of replaceable keypad legends that identify the functions of the control head
◆
buttons). Before installing the legends, configure the operation of the control head with the
Convergence Configuration Software (see the Convergence Network Software Configuration
Manual, part no. 2562418).
A scored sheet of two labels with precautions to guard against hearing loss when operating the
◆
siren (part no. 1612339).
A safety message card for operators of Federal Signal Sound and Light System
◆
(part no. 256B691).

Applying the Replaceable Control Head Legends

To apply the legends:
1. Peel the appropriate legends from the sheet and apply them to the control head buttons.
2. Verify that the label is properly tucked under the retaining ridge on the button.
28

Figure 6.1 Installing the Control Head Labels

LEGEND STICKER
REMOVED FROM
ADHESIVE SHEET
BLANK PUSHBUTTONS
INSERTED LEGENDS
CONTROL PAD
Pathfinder
ADHESIVE SHEET
290A6323
TM