Chapter 5 Testing The Pathfinder Installation; Figure 5.1 Pathfinder Default Programming - Federal Signal Corporation Pathfinder Installation And Maintenance Instructions Manual

CHAPTER 5
Testing the Pathfinder Installation
The Pathfinder is programmed with a default configuration that you can use to quickly check your
initial installation system before you configure the system. Test all vehicle functions, including horn
operation, vehicle safety functions, and vehicle lighting systems for proper operation. Ensure that
the installation has not affected the vehicle operation or changed any vehicle safety functions or
circuits. Do not test the sound and light system of the vehicle while driving. Operating the vehicle
warning system may pose a hazard to the operator and other drivers if the system does not function as
expected. Test the vehicle only in a controlled environment. After testing is complete, provide a copy
of this manual to the instructional staff and all operating personnel.
Push Buttons
Slide Switch

Figure 5.1 Pathfinder Default Programming

Volume Control
BTN 1 BTN 2 BTN 3
BTN 8
Rotary Knob
Speaker Diagnostics
BTN 4 BTN 5 BTN 6
SignalMaster Display
Pathfinder
TM
BTN 7
BTN 9
Microphone
Self-Contained Model
25