B Channel Programmable "X" Control Change - PROEL MS 32 Owner's Manual

B CHANNEL PROGRAMMABLE "x" CONTROL CHANGE :

Value Cursor
Press and release:
- the "CCXXX/CONTINUE" switch (
"PATCH" parameter or
- the "SELECT/CHANNEL" switch (
programming.
B xCC 91 =
‚‚‚
Æ Æ
40
Press the "10
to select a value from 0 to 120 and 0 to
127, in the Off condition, to be inserted,
respectively, as the type and the value of
B channel control change.
Use the "
to move the cursor back and forward.
Æ Æ
) to confirm the data and display/modify the following
) to confirm the data and exit from "PATCH" parameter
B yCC 93 =
 
" and "10 " switches (
 
5" and "6 " switches (
0
Proel MS 32 Owner's Manual
Æ Æ
)
Æ Æ
)
‚‚‚
41