Foot Controller 2 Calibration - PROEL MS 32 Owner's Manual

Press and release:
- the "CCXXX/CONTINUE" switch (
display/modification of the following "GLOBAL" parameter or
- the "SELECT/CHANNEL" switch (
programming.

FOOT CONTROLLER 2 CALIBRATION :

FC2 mn Ok Mx Ok
Æ Æ
) to confirm the data and pass to the
‚‚‚
Æ Æ
) to confirm the data and exit from "GLOBAL" parameter
FC2 mn -- Mx --
Position the Foot Pedal inserted in the FC2
socket at minimum value and press the
START/STOP switch;
Position the Foot Pedal at maximum value
and press the START/STOP (
OK is displayed twice on the screen.
Æ Æ
) switch.
Proel MS 32 Owner's Manual
11