Set Mode; Set Selection (0~9) - PROEL MS 32 Owner's Manual

In the SET mode it is possible to:
- recall the 10 SETS stored in the pedalboard using the switches from 0 to 9
- recall the 10 SETS stored in the pedalboard using the switches "
- activate START/STOP and CONTINUE functions
- edit the SET parameters using the SELECT/CHANNEL" switch
CONTINUE

SET SELECTION (0~9):

The pedalboard is in the SET mode when the SET LED is on, the cursor is under the SET Number
and the arrow points the SET Number.
When pressing one of the switches from 0 to 9 or one of the switches "
display shows the SET number recalled and the 10 characters name associated to it.
All the set parameters are recalled :
- Song from 0 to 127/Off (midi message F3 00~7F)
- "A" part Midi Channel setting (from 1 to 16)
- "B" part Midi Channel setting (from 1 to 16)
- the stored PATCH of the new recalled SET is automatically selected
- all the recalled Set and Patch parameters are transmitted via Midi
Example:
press the switch no. 6 once or the "
6<*FACTORY6*
SET Name
SET Number
Note: The pedalboard allows you to recall alternatively two different sets using only one switch;
to recall alternatively the sets no. 3 and 7 press:
- the switch no. 3
- the switch no. 7
The pedalboard will now recall alternatively the sets no. 3 and 7 by pressing only switch
no 7.
16
Proel MS 32 Owner's Manual

SET MODE

EDIT SET SELECTION (0~9)

0
PATCH Number
" switch six times, the display will show:

"
START/STOP

", the left side of the