Write Global Parameter - PROEL MS 32 Owner's Manual

WRITE GLOBAL PARAMETER:

Press and release the "SELECT/CHANNEL" switch (
"GLOBAL" parameter programming; the display will show the following message:
WriteGlobal? W/S
When using the WRITE switch the display will show the following message:
Write Complete !
and will go back to the PATCH MASTER screen shot after some seconds:
0 *FACTORY0*
14
Proel MS 32 Owner's Manual
WriteGlobal? W/S
>0
Æ Æ
) to confirm the data and exit from
Keep the WRITE/MODE switch (
pressed to store the GLOBAL parameters.
Press the START/STOP switch (
exit without storing
parameters; the data of the previous
parameters will be lost.
Æ Æ
)
Æ Æ
) to
‚‚‚
the GLOBAL