Press and release:
- the "CCXXX/CONTINUE" switch (
display/modification of the following "GLOBAL" parameter or
- the "SELECT/CHANNEL" switch (
programming.
FOOT CONTROLLER 1 CALIBRATION :
10
Proel MS 32 Owner's Manual
Æ Æ
) to confirm the data and exit from "GLOBAL" parameter
FC1 mn -- Mx --
FC1 mn Ok Mx Ok
Æ Æ
) to confirm the data and pass to the
Position the Foot Pedal inserted in the FC1
socket at minimum value and press the
START/STOP switch;
Position the Foot Pedal at maximum value
and press the START/STOP switch (
OK is displayed twice on the screen.
Æ Æ
).