Patch Bay Switch 3-4 - PROEL MS 32 Owner's Manual

PATCH BAY SWITCH 3-4 :

Value Cursor
Note: The Patch bays stored in the On condition can be rapidly activated and deactivated
when out of the EDIT mode by pressing the Continue switch.
The Patch Bay Switch function is linked to the Global "Continue switch assign"
parameter.
To operate as PBS control, the "Continue switch assign" parameter must be set in
PBS or in PBS+CNT (cfr. page 11)
Press and release:
- the "CCXXX/CONTINUE" switch (
"PATCH" parameter or
- the "SELECT/CHANNEL" switch (
programming.
34
Proel MS 32 Owner's Manual
PBS3 Of PBS4
Æ Æ
‚‚‚
Of
Press the "10
to choose the On/Off
inserted for the patch bay switches 3 and 4.
Use the "
move the cursor back and forward.
) to confirm the data and display/modify the following
Æ Æ
) to confirm the data and exit from "PATCH" parameter
A c0= Of c32= 0f
 
" and "10 " switches (
condition to be
 
5" e "6 " switches (
Æ Æ
)
Æ Æ
) to
‚‚‚