Write Set Memory - PROEL MS 32 Owner's Manual

WRITE SET MEMORY:

When keeping the "MODE/WRITE" switch (
in Edit mode :
the following message will be displayed:
Set Number
When using the WRITE switch, the display will show the following message:
Write Complete !
and will go back to the SET MASTER screen shot after some seconds:
24
Proel MS 32 Owner's Manual
pressing and releasing the "SELECT/CHANNEL" switch (
data and exit from "SET" parameters programming
WrteSet 0 ?
Exit (no write)
Write
Æ Æ
) pressed for some seconds
‚‚‚
or
WrteSet 0 ?
W/S
Press the "10
to select a SET from 0 to 9 where to store
the inserted parameters. (Keeping the
switch pressed the characters will shift
automatically).
Keeping the WRITE/MODE switch (
pressed the displayed SET is stored.
Press the START/STOP switch (
exit without saving the SET. All the data
of the previously modified parameters are
lost.
Æ Æ
) to confirm the
W/S
 
" and "10 " switches (
Æ Æ
)
Æ Æ
)
‚‚‚
Ö Ö
) to