Sony MEU-WX1 Operating Instructions Manual page 24

When selecting the COMPUTER input
1
* The / menu cannot be adjusted.
3
U S E R C O N T R O L ( 2 / 3 ) R r
S U B C O N T R O L
xC O N T R A S T
· B R I G H T
· C H R O M A
· P H A S E
U S E R C O N T R O L ( 3 / 3 ) R r
I N P U T
xS I Z E
· S H I F T
· S H I F T
· D O T
· R E S O L U T I O N
· R E S E T
24
Adjustment Using the Menus
x
x
x
x
S E T T I N G
H xxx
H xxx
xx
V
P H A S E xx
xxxx
Submenu Setting
SUB CONTROL You can finely adjust the
adjustment range of the following
controls on the front panel;
CONTRAST and BRIGHT
controls.
• CONTRAST: Adjusts the picture
• BRIGHT: Adjusts the picture
For details of input signals and
adjustable/setting items, see
page 13.
INPUT SETTING You can adjust to monitor the
picture more clearly.
• SIZE H: Adjusts the horizontal
• SHIFT H: Adjusts the position of
• SHIFT V: As the setting
• DOT PHASE: Adjusts the dot
• RESOLUTION: Sets when the
• RESET: Resets the value of
contrast.
brightness. Adjust the
brightness when the
BRIGHT control (page 11)
on the front panel is set to
the center position and the
black level is not right.
size of the picture. The
higher the setting, the larger
the horizontal size of the
picture. The lower the
setting, the smaller the
horizontal size of the
picture.
the picture. As the setting
increases, the picture moves
to the right, and as the
setting decreases, the picture
moves to the left.
increases, the picture moves
up, and as the setting
decreases, the picture moves
down.
phase. Adjust the picture
further for a finer picture
after the picture is adjusted
by pressing the APA button.
computer signal is input and
it is difficult to understand
the signal type such as
XGA/60 or WXGA/60.
•XGA: Displayed as XGA
signal.
•WXGA: Displayed as
WXGA signal.
•STANDARD: Displayed
according to the aspect of
the connected monitor.
When the aspect of the
monitor is 4:3, the signal is
displayed as XGA.
When the aspect of the
monitor is 15:9, the signal is
displayed as WXGA.
SIZE H, SHIFT H, SHIFT V
and DOT PHASE to the
factory preset value.