Installing To The Rack - Sony MEU-WX1 Operating Instructions Manual

Multiformat engine unit

Hide thumbs Also See for MEU-WX1:

Brochure & specs (6 pages)

Table Of Contents

Table of Contents

Enlarged version

j AUDIO MONITOR OUT connector (stereo

mini jack)

The audio signal which is selected by the input select

button on the front panel is output.

When an analog video signal is input, the signal which

is set in the USER CONFIG menu is output (see page 12

and 26).

When an input adaptor is attached, the channel which is

set in the OPTION CONFIG menu is output (see

page 29).

The audio signal from this connector is monitored on the

front speakers (see page 12).

k PARALLEL REMOTE terminal (modular

connector)

Forms a parallel switch and controls the Multiformat

Engine externally.

For details on the pin assignment and factory setting

function assigned to each pin, see page 31.

l COMPUTER SIGNAL IN connector (D-sub 15

pin, female)

Connect to the monitor output on a computer. Only the

computer signal can be input to this terminal.

Press the COMPUTER button to select the signal.

The Plug & Play function corresponds to DDC2B.

m COMPUTER AUDIO connector (stereo mini

jack)

Connect to the audio output connector of the computer.

n Service terminal

This connector is for use by service personnel only.

o DISPLAY SIGNAL OUT connector

Connect a suitable monitor. Connect to the LCD

monitor by using the cable supplied with the LCD

monitor.

Specified monitors : LMD-150/LMD-170W/LMD-

171W/LMD-230W/LMD-210/LMD-320W

p DISPLAY DC OUT connector (XLR, female)

Connect a suitable monitor. Connect to the LCD

monitor by using the cable supplied with the LCD

monitor.

Specified monitors : LMD-150/LMD-170W/LMD-

171W/LMD-230W/LMD-210

Notes

• Do not connect a monitor other than the specified one.

• When LMD-150/LMD-170W/LMD-171W is

connected and the unit is used with a DC power

supply, the display IF cable SMF-600 (optional) is not

available.