Sony MEU-WX1 Operating Instructions Manual page 10

Input
Analog RGB/component input connectors
Analog RGB or component (Y, P
video equipment can be input through these connectors.
Y/C input connectors
The video signal, split into the luminance signal (Y) and
the chrominance signal (C), can be input through this
connector.
Expandable input capability
You can easily expand the input capability by installing
an input adaptor (not supplied) in the input option slot in
the rear of the unit.
External sync input
When the EXT SYNC button is in the on position, the
unit can be operated on the sync signal supplied from an
external sync generator.
Automatic termination (connector with
mark only)
The input connector is terminated internally at 75 ohms
when nothing has been connected to the output
connector. If a cable is connected to the output
connector, the internal terminal is automatically released
and the signals input to the input connector are output to
the output connector (loop-through).
Accepts analog computer input signals
The built-in scan converter enables the monitor to detect
VGA, SVGA, XGA, WXGA and SXGA signals, and
display them on the screen.
We recommend displaying an image in XGA or WXGA
signals.
Functions
APA (Auto Pixel Alignment) function
You can display pictures from the computer in the
appropriate size by simply pressing the APA button.
Select color temperature and gamma mode
You can select the color temperature from among two
(high and low) settings and gamma mode from among
five settings. You can also adjust the color temperature
to the appropriate setting.
Aspect setting
You can set the monitor to 4:3 or 16:9 display mode
according to the input video signal.
Various markers
Displays frame boundaries such as the center marker,
safe area marker, etc. and supports the various film
aspect ratios.
10
Features
, P ) signals from
B R
Scan setting
You can set the display size to 0% or 5% over scan
mode.
H/V delay mode
The horizontal and vertical sync signals can be
monitored simultaneously in the H/V delay mode.
On-screen menus
You can set the appropriate settings according to the
connected system by using the on-screen menus.
EIA 19-inch rack mount bracket available
The monitor may be mounted on an EIA-standard 19-
inch rack, using the supplied mounting bracket.
Key inhibit function
You can inhibit a key, function to prevent misoperation.
Select language display
You can select from seven display languages English,
German, French, Italian, Spanish, Japanese and
Chinese.
External remote control function
You can directly select the input signal, aspect, etc., by
operating the equipment connected to the PARALLEL
REMOTE terminal.