Connections; To Connect An Lcd Monitor; To Connect The Ac Power Cord - Sony MEU-WX1 Operating Instructions Manual

Connections

To Connect an LCD Monitor

Before connecting the cable, disconnect the power cord.
Connect the DISPLAY SIGNAL OUT connector of this
unit and DISPLAY SIGNAL IN connector of the
monitor and DISPLAY DC OUT connector of this unit
and DISPLAY DC IN connector of the monitor using a
cable supplied with the monitor.
(When connecting LMD-320W, connect the DISPLAY
SIGNAL connector only.)
DISPLAY
DC OUT
DISPLAY SIGNAL
OUT
16
Connections
DISPLAY DISPLAY DC IN
SIGNAL IN

To Connect the AC Power Cord

Connect the supplied AC power cord as illustrated.
1
Plug the AC power cord into the AC IN socket on
the rear panel. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC plug holder (Supplied)
2
Slide the AC plug holder over the cord until it locks.
To remove the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
AC IN socket
AC power cord