Tieline Bridge-IT User Manual page 48

48 Bridge-IT Manual v4.0
· Registration Timeout (this shouldn't need to be adjusted from the default setting).
Important Notes:
· In most situations it is best to configure a SIP account when the codec is configured
with a public IP address.
· Each SIP account can only be mapped to a single SIP interface, i.e. SIP1 (LAN1) or
SIP 2 (VLAN1).
· Up to 6 SIP accounts can be added to the codec.
· It is also possible to
Toolbox Web-GUI.
Adding a SIP Account
1. Press the the SETTINGS
2. Navigate to Accounts and press the
3. Select an account which is Not Configured and press
4. Select Edit to enter SIP server account details, then press
5. Navigate to each field in turn and press the
6. Select Ans Route and use the Change Account Answer Route screen to route incoming
calls to this SIP account to a specific audio stream. The route setting in this menu must
correspond with the answering route configured in an audio stream within the loaded program.
If the default value Any is used then a call will be routed to an audio stream on a first-come-
first-served basis in a multi-stream program.
add and register a SIP account
button, then navigate to SIP and press the
button.
button to enter SIP account credentials.
to your codec using the HTML5
button.
.
.
© Tieline Research Pty. Ltd. 2019