Installing A Security Certificate - Tieline Bridge-IT User Manual

17.22

Installing a Security Certificate

Tieline codecs support the installation of TLS/SSL (hereafter referred to as SSL) security
certificates to deliver an additional layer of security when connecting to IP networks. The digital
SSL security certificate authenticates the codec and provides more secure encrypted HTTPS
browser connections. The codec supports installing a private key as well as an intermediate and
SSL certificate.
Certificate Installation
To install certificates purchased from a reputable vendor:
1. Press the SETTINGS
2. Use the navigation buttons to select Web-GUI and press the
3. Navigate down to SSL and press the
4. Select Configure SSL and press the
5. Ensure the Private Key, digital SSL Certificate and Intermediate Certificate (if required), are
loaded onto an SDHC card and then insert it into the SD card slot on the front panel of the
codec. Note: A single partition FAT32 formatted SDHC card must be used
6. Select Private Key and navigate to the correct directory and .key (Private Key) file to install
from the SDHC card and press the
© Tieline Research Pty. Ltd. 2019
button.
button.
button.
button.
Bridge-IT Manual v4.0
button.
201