Tieline Bridge-IT User Manual page 134

134 Bridge-IT Manual v4.0
12. Click Next to configure the Session Protocol as SIP for the answering connection to
receive a SIP call.
13. Click Next to configure the jitter buffer settings for the answering connection.
14. After configuring all settings there are 3 options:
Configuring SD Card File Playback Options
1. Click Next to configure SD card file playback using Output Audio Source configuration
options to maintain program audio at transmitter sites.
2. Click the blue Plus symbol
Click the Minus symbol
the panel to configure silence and resume threshold parameters.
i. If you want to create another answering connection, select the
check-box for Create another answering connection and continue
through the wizard.
ii. Click Save Program to save the program at this point.
iii. Click Next to configure Output Audio Source options.
to add the SD Card File Backup Output Audio Source.
to remove it. Follow the instructions on the right-hand side of
© Tieline Research Pty. Ltd. 2019