9.2.2
Description of parameters
Set
Set
Set
Set
Set
Set
Display
If P1=0.0
Set
Set
Set
Set
Display
Set
If P2=0.0
Set
Set
Set
Return to "P1"
LCK
Level 1
(User)
◎
◎
◎
◎
◎
◎
Proportional band 1
(For output 1)
Integral time 1
(For output 1)
Derivative time 1
(For output 1)
Reserved
Auto tuning offset value
Output 1 cycle time
Hysteresis for output 1
ON/OFF control
Proportional band 2
(For output 2)
Integral time 2
(For output 2)
Derivative time 2
(For output 2)
Output 2 Cycle time
Hysteresis for output 2
ON/OFF control
Control gap 1
(For output 1)
Control gap 2
(For output 2)
Function lock
Levels entering available
Level 2
Level 3
(PID)
(Input)
◎
◎
------
◎
------
◎
------
◎
------
◎
------
◎
Range:0.0~200.0%
ON/OFF control if set to 0 (0.0)
Range:0~3600 seconds
PD control if set to 0
Range:0~900 seconds
PI control if set to 0
Reserved
Range:0~USPL
Range:0~150 seconds
Relay output : 10
Voltage pulse output : 1 , mA output: 0
Range:0~1000
The same with P1
The same with I1
The same with D1
The same with CYT1
The same with HYS1
Set point of output 1 (Heating side)
=SV - GAP1
=SV + GAP2
Parameters which can be
Level 4
(SET)
------
All parameters (default value)
◎
------
All parameters except level 3
------
Parameters in level 1
------
------
27
changed
All parameters
"SV" and "LCK"
Only "LCK"