Domo DO7276S Instruction Booklet page 41

PARTS
1. Floor nozzle
2. Button to pull out or retract brushes
3. Slide button to set length of tube
4. Telescopic tube
5. Hose
6. Connection for hose
7. Handle
8. Handle lid dust bag compartment
3
1
2
ASSEMBLY
Always unplug the vacuum cleaner before (dis)assembling any parts.
Hose
Assembly: Put black ring at the end of the hose into the
hose connection in the vacuum cleaner and turn to the right
so that it is locked into place.
Disassembly: Unplug the vacuum cleaner. Turn the black
ring at the end of the hose to the left and remove from the
hose connection.
Telescopic tube
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. To do this, push the slide button
forward and pull out the bottom part of the tube to make it longer. Release the
slide button and let the tube snap into place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the
nozzle.
4
6
5
7
8
9. Full dust bag indicator
10. Button for automatic cord rewinding
11. Button to set the suction power
12. On/off button
13. HEPA filter underneath grid
14. Dust bag: 3 l
15. Dust bag frame
10
13
12
9 11
41
DO7276-7-8S
14
15