Fluke 1630-2 User Manual page 7

• Do not use the Product above its rated
frequency.
• Limit operation to the specified measurement
category, voltage, or amperage ratings.
• Do not touch voltages >30 V ac rms, 42 V ac
peak, or 60 V dc.
• Hold the Product behind the tactile barrier.
• The battery door must be closed and locked
before you operate the Product.
• Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
Remove the batteries if the Product is not used
•
for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are
not removed, battery leakage can damage the
Product.
• Do not operate the Product with covers
removed or the case open. Hazardous voltage
exposure is possible.
Repair the Product before use if the battery
•
leaks.
• Use only specified replacement parts.
• Have an approved technician repair the
Product.
Remove the input signals before you clean the
•
Product.
• Do not operate within external low frequency
magnetic fields >30A/m.
Symbols used on the Product and in this manual are
explained in Table 1.
Earth Ground Clamp
Safety Information
3