Verify License Installation; Factory Default Configuration - Dell EMC VxRail P series Deployment Manual
Multirack deployment of vxrail cluster using network virtualization overlays (nvo)
Hide thumbs
Also See for VxRail P series:
- Network manual (48 pages) ,
- Owner's manual (33 pages) ,
- Owner's manual (48 pages)
Table of Contents
Advertisement
Note: Figure 2 provides a list of the supported switches and operating systems for VxRail deployments.
4.2.2
Verify license installation
Run the command show license status command to verify license installation. Locate the License
Type: field and verify that PERPETUAL displays in the field.
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name
Product Name
Hardware Version:
Platform Name
PPID
Service Tag
License Details
----------------
Software
Version
License Type
License Duration:
License Status
License location:
---------------------------------------------------------
Note: If an evaluation license is installed, licenses purchased from Dell EMC are available for download on
Dell Digital
4.2.3
Factory default configuration
The configuration commands begin with the Dell EMC Networking switches at their factory default settings.
Dell EMC Networking switches running the Dell EMC OS10 Enterprise Edition (OS10EE) can be reset to their
default configuration using the following commands:
OS10# delete startup-configuration
Proceed to delete startup-configuration [confirm yes/no(default)]:y
OS10# reload
System configuration has been modified. Save? [yes/no]:n
Proceed to reboot the system? [confirm yes/no]:y
When complete, the switch reboots to the factory default configuration.
Note: By default, OS10EE has Telnet disabled, SSH enabled, and the OOB management interface that is
configured to get an IP address using DHCP. The default username and password are both admin. Dell EMC
recommends changing the admin password to a complex password when logging in for the first time.
19
Dell EMC VxRail Multirack Deployment Guide
:
Dell EMC
:
S5248F-ON
A00
:
x86_64-dellemc_s5248f_c3538-r0
:
CN046MRJCES0085N0006
:
AAAAAAA
:
OS10-Enterprise
:
10.4.2.0
:
PERPETUAL
Unlimited
:
Active
/mnt/license/GPZQG02.lic
Locker. See the
OS10 Enterprise Edition User Guide
for installation instructions.
Hide quick links:
Advertisement
Table of Contents
