Page 1
Assembly Instructions 10'x12' Aluminum Gazebo Item: L-GZ399PAL-B Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The final product will be a quality piece that will go together smoothly and give years of enjoyment.
Page 2
Parts List Post Base protector Post base Long panel (1) Long panel (2) Short panel (1) Short panel (2) Slanting bar Long mid top bar Short mid top bar Slanting bar Connector Mid top bar connector Conner decor block Small top connector Small top bar (1)
Page 3
Long netting bar Short netting bar Top Finial Small canopy Large canopy Wall Mosquito netting NOTE: We put Netting bar (O1 & O2) into two Posts (A). ...
Page 4
Please do not tighten the screws till Fig.6 Fig.1: Fit the Base protector (B) onto the Post (A), connect the Post base (C) and post (A) by using bolt (AA) and flat washer (BB).
Page 5
Fig.7: Fix Small panel of top frame (N2) to Long panel of top frame (N1) by using bolt (DD) and washer (BB). Fig.8: Fix one end of Slanting bar (F) to the top of Post (A) by using bolt (AA) and washer (BB). ...
Page 6
Fig.16: Spread the Large canopy (R), hang the pothooks of the large canopy into the holes on the panels. ...
Page 7
Please do not return this product to the store. For technical assistance on assembly or replacement parts call Sunjoy Industries at 1(866) 578-6569 from 8:30 AM to 5:30 PM EST or Email bj@sunjoygroup.com...
Need help?
Do you have a question about the L-GZ399PAL-B and is the answer not in the manual?
Questions and answers