Print And Return To Text Mode In Page Mode; Carriage Return - POSIFLEX Aura Series Command Manual

3. In page mode the printing and paper feed does not actually occur on receiving
this command. But the data after {LF} will be arranged in next line.
4. This command sets the print position to the beginning of the line after line feed.
CODES
(HEX/CONTROL):
NAME:

Print and return to text mode in page mode

FUNCTION:
EXPLANATION:
1. This command works only in page mode.
2. The buffer data is cleared after being printed.
3. The last printing settings in page mode printing such as underline, character
font, emphasized, double strike, character size and reverse printing remain the
same for text mode printing after this command.
4. The printing area set by {ESC} W in page mode remains the same after this
command.
5. The printer does not execute paper cutting by this command.
6. This command sets the print position to the beginning of line in text mode.
CODES
(HEX/CONTROL):
NAME:

Carriage return

FUNCTION:
EXPLANATION:
1. When automatic line feed is enabled, this command functions the same as
{LF}; when automatic line feed is disabled, this command is ignored.
2. Sets the print starting position to the beginning of the line.
3. This command is ignored in a serial interface model.
4. This command is set according to the DIP switch position 7 of SW 1 is set to
On with a parallel interface model.
<0C> / {FF}
Prints the data in the print buffer collectively and
returns to text mode
<0D> / {CR}
Set the printing position to the beginning of the
line
Command Manual - Page 6