Figure 5-24 Interlocks Page; Figure 5-25 Add Interlock; Table 5-2 Interlock Settings Description - Honeywell IP-AK2 Installation And Configuration Manual

Configuring via IP-AK2 Web Server

Figure 5-24 Interlocks Page

Creating Interlock
1.

Figure 5-25 Add Interlock

2.

Table 5-2 Interlock Settings Description

Setting
Name
Trigger
Reacting Component
Trigger Alarm Action
Trigger Normal Action
Modifying Interlock
1.
26
Some of interlocks can't be edited or disabled. These interlocks are created
internally to make controls over doors work. They are never supposed to be
Note
changed manually.
Click【Add Interlock】above the list, the page below will pop up:
Refer to the descriptions in the following table to configure each field:
Description
A unique name identifies the interlock.
Specifies the input or output for which a change of state will cause a
reaction from another input, or output. Also, use the drop-down list
to specify the number of the input, or output.
Specifies the input or output that will react to a change of state from
the trigger point. Also, use the drop-down list to specify the number
of the input, or output.
Specifies the reacting component's action when the trigger's state is
changed from Normal to Alarm. Select the action from the Upon
Trigger Alarm drop-down list.
Specifies the reacting component's action when the trigger's state is
changed from Alarm to Normal. Select the action from the Upon
Trigger Normal drop-down list.
Click the name of the interlock to be modified, the page below will pop up: