Configuring Via Ip-Ak2 Web Server; Connecting To Ip-Ak2 Web Server; Connecting Panel To Computer; Figure 5-1 Ip-Ak2 Web Server Hub Connection - Honeywell IP-AK2 Installation And Configuration Manual

5 Configuring via IP-AK2 Web Server

IP-AK2 panel is a two-reader access controller with built-in web server. Through
standard web browser, up to 20 doors can be controlled and monitored.
IP-AK2 panel supports two kinds of web browsers:
Internet Explore 6.0
•
• Firefox 3.0
Note

Connecting to IP-AK2 Web Server

Before connecting to the IP-AK2 Web Server, The IP-AK2 panel must be connected to
the Computer first, and then the network connection should be configured.

Connecting Panel to Computer

There are two ways to connect IP-AK2 panel to computer, see below:

Figure 5-1 IP-AK2 Web Server Hub Connection

Connect the computer's Ethernet port and the IP-AK2 panel's
Ethernet port to an Ethernet Hub or switch with standard straight-
through Ethernet patch cables.
If not noticed, all operations in this manual are performed in Internet Explore 6.0.
All function tests have been passed using web browser in Windows XP
Professional. Do not guarantee web browser compatibility in other operation
system.
Ethernet
Cable
Ethernet Hub
IP-AK2
Honeywell
15