Configuring via IP-AK2 Web Server
3.
Searching Card
1.
2.
Figure 5-47 Search Card
System Configuration
User Configuration
Only User with the following roles can use the IP-AK2 Web Server:
•
•
Click User Configuration to display the User Configuration page, then you can view
existing users, create a new user, modify an existing user, and delete users.
Figure 5-48 User Configuration Page
Creating User
1.
Figure 5-49 Add User
2.
•
•
•
40
Click【OK】on the prompt window.
Check the【Search Mode】above the card list to active search mode.
Enter desired criteria and click【Search】, then the result will be shown.
You can use wild char (*) in first name and last name field to do fuzzy search. For
Note
example, use "Chun*" will return card 17900.
Administrator - Configures and monitors the IP-AK2 System.
Operator - Monitors and operate the system.
Click【Add User】above the list, the page below will pop up:
Configure the parameters as below:
User Name: enter a unique user name of the user.
New Password: enter a new password of the user.
Confirm PWD: re-enter the new password.