Navigation Lights - Quicksilver Activ 675 Sundeck Owner's Manual

Table of Contents

Advertisement

Quicksilver 675SD — General Information
Dash Switch Panel

13. Navigation Lights

Your boat comes equipped with navigation lighting for use at night or in low visibility conditions. Prior
to running at night, you must install the stern pole light into the socket located on the transom. A
three position switch, located at the helm switch panel, controls the navigation lights. To turn on the
Navigation lights, push the upper part of the switch forward. This illuminates the port (red), starboard
(green) and all around light (white) showing other vessels that you are underway. To turn on the
anchor light, push the lower part of the switch down. This illuminates the all around light (white),
letting other boaters know that you are anchored at a given location.
Navigation light switch
All around light stored in aft seat base
o
360
All Around Light
(White), visible 2NM
Navigation lights "OFF"
Navigation lights "ON"
Anchor light "ON"
10
Anchor/ navigation light
Fresh water (optional)
Forward bilge pump
Aft bilge pump
o
112.5
Port Navigation
Light (Red), visible 2NM
o
112.5
Stbd Navigation
Light (Green), visible 2NM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents