ZXSDR R8860E GU858 User Manual
Electrical Safety Instructions
The following are the electrical safety instructions about tools, high voltage, power cables,
holes and lightning:
l
Tools
Use special tools rather than common tools for high-voltage and AC operations.
l
High Voltage
High voltage is hazardous. Direct or indirect contact with high voltage or main supply
using a wet object could result in death.
Strictly follow local safety rules to install AC power devices.
à
Installation staff must be qualified for performing high-voltage and AC operations.
à
Do not wear any watch, hand chain, bracelet, ring or any other conductive objects
à
during such operations.
Prevent moisture from accumulating on the equipment during operations in a
à
damp environment.
l
Power Cable
Never install or uninstall power cables while they are live. Otherwise, the power cable,
when contacting a conductor, may result in sparks or electric arc causing a fire or even
damage to eyes.
Make sure of shutting off power supply before installing or disconnecting a power
à
cable.
Before connecting the power cable, make sure that the connecting cable and its
à
label are appropriate for the actual installation requirements.
l
Drilling Holes
It is not allowed to drill chassis holes without permission.
Unqualified drilling could damage wiring and cables inside the chassis.
à
Additionally, metal pieces inside the chassis created by the drilling could result
in a short circuit. Use insulation protection gloves and first move cables inside a
chassis away when drilling is necessary on a chassis.
SJ-20101210110401-001|2010-12-06
Danger
Warning
Warning
4-4
ZTE Proprietary and Confidential