Troubleshooting - Panasonic CZ-TAW1 Installation Manual

Troubleshooting

■
When you cannot connect in the Wireless
mode
→ Check the strength of the wireless
signal.
How to check the strength of the wireless signal (press the Check switch)
→You can check the strength of the wireless signal by checking if the
Link LED is lighting or blinking.
<
Wireless signal>
When there is no problem with the wireless signal but the Status
LED does not light
→ Check the router connections.
* If the wireless signal strength is BAD or worse, connect using the
Ethernet mode.
■
When you cannot connect in the Ethernet mode
• When the Status LED does not light
→Check the LAN cable connections.
Check the router connections.
12
Link LED
Check switch
Strength: GOOD
Strength: NORMAL
Strength: BAD
Strength: IMPOSSIBLE