Panasonic DMW-DCC16 - DC Coupler Manual

Table of Contents

Contents

1 Introduction
2 How to use
3 Precautions for use
4 Specifications
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

Introduction

Please read these instructions carefully before using this product, and save this manual for future use.

This DC Coupler is intended to be used for connecting the AC Adaptor and the digital camera.

Even if the digital camera is dust and splash resistant, when the DC Coupler is being mounted, the DC coupler cover opens, so the structure ceases to be dust and splash resistant.
For the latest information on compatible devices, see the operating instructions, catalogue or website of the digital camera.

How to use

Preparation:

Turn the camera off.
Connect the AC cable to the AC Adaptor and a wall outlet.

Name of the Components:

: Battery door

: DC coupler cover

: DC Coupler

: AC Adaptor

: AC cable

How to connect:

DC-S1 is used as an example for explanation.

Open the battery door.

Insert the DC Coupler paying attention to its direction.

Open the DC coupler cover and then thread the cable of the DC Coupler.

If the DC Coupler cover is hard to open, push open from inside.

Close the battery door firmly.

Connect the AC Adaptor to the DC Coupler.

Precautions for use

Be sure to read the operating instructions of your digital camera.
After use, remove the DC Coupler from the ACAdaptor and the digital camera. Close the DC coupler cover.
The camera becomes warm during use. This is not a malfunction.

Specifications

Specifications are subject to change without notice.

Dimensions:	Approx. 41.7 mm (W)k72.35 mm (H)k21.0 mm (D) [1.65q (W)k2.85q (H)k0.83q (D)] (Except for cables)
Cable length:	Approx. 130.5 mm/5.14q
Mass (Weight):	Approx. 40 g/0.09 lb