Panasonic CZ-TAW1 Installation Manual page 10

3 On the wall near the indoor unit, attach the adaptor by
screwing screws through the holes in the back cover.
4 Pull the CN-CNT cable through the hole in the bottom of
the adaptor and re-attach the front cover to the back cover.
5 Use the included cord clamp to fix the CN-CNT cable to
the wall.
Pull the cable around as shown in the diagram so that external forces
cannot act on the connector in the adaptor.
Furthermore, on the indoor unit end, use the included cable tie to fix the
cables together.
CAUTION
When the indoor adaptor cannot be reached using the included CN‑CNT
cable, use a commercially available extension cord (10 m (option)).
Setting up outside exposes the adaptor to the dangers of damage and
to unauthorised network access via a LAN connection.
10
Screws
CN‑CNT cable
(Take care not to pinch
the cable)
Cord clamp
Cable tie