Krautzberger KS-1 Operating Instructions Manual page 5

During every - even a very brief - break in operation, push the safety lever (29)
forward and check to make sure that the trigger is blocked.
Adhere to the pressures and temperatures listed under "Technical Data"!
If high temperatures are exceeded for a certain period (e.g. > 8 hours at > 43° C, > 10
mins. at > 48° C, or > 1 min. at > 51° C, attach suit able protective devices and post
notification concerning the risk of combustion due to coating substance, and draw
particular attention to risks resulting from leakage or bursting of the spray gun and
the hoses and/or hose connections! If necessary, wear suitable protective clothing
(e.g. goggles, gloves etc.).
In the event of unforeseen occurrences, release the trigger (22 or 25) to interrupt the
material flow! Then immediately push the safety catch (29) to block the trigger. Close
the shutoff valve on the pump.
In the event of unforeseen material discharge (e.g. due to loosening of a material
hose connection or bursting of the material hose), close the shutoff valve at the
material source as quickly as possible! It is advisable to mount the shutoff valve
within reach of the operator of the spray gun to ensure that the unforeseen discharge
of material can be stopped quickly - particularly when using hazardous substances.
Ensure that neither spraying nor material discharge can be activated accidentally or
by defects in the unit as long as one or more persons are in the hazard zone. Take
steps to ensure that no alterations can occur or be made to the material pressure
during setting and maintenance work without the knowledge or consent of the setup
technician!
Ensure adequate illumination of the operating zone!
When using flammable and/or potentially explosive materials, ensure that a fire can
be rapidly extinguished!
Only use spare parts and accessories from Krautzberger GmbH! Krautzberger
GmbH assumes no liability for damage if any external parts are used.
The instructions and notes of EN 1953 "Spraying Equipment for Coating Substances;
Safety Requirements" are to be adhered to, in particular the warning, hazard and
safety notes pertaining to risks and safety requirements and/or measures.
Hazards which exceed those normally expected with the use of spraying equipment
have not come to our attention in the handling of the spray gun type KS or versions
KS-1, KS-1D, KS-1L, KS-1M or KS-2. If, however, accidents or hazardous situations
occur during practical applications, please notify us accordingly.
5