Routing Table; Dhcp Bindings - Cisco RV260 series Administration Manual

Status and Statistics
• SSID – The primary name assigned to a wireless network.
IPv6
• Hostname – Name of the connected device.
• IPv6 Address – The IPv6 address of the connected device.
• MAC Address – MAC address of the connected device.
• Type – The type of IP address of the connected device.
• Interface – The interface the device is connected to.
• SSID – The primary name assigned to a wireless network.

Routing Table

Routing is the process of moving packets across a network from one host to another. The Routing Status of
this process is displayed in the route table. The route table contains information about the topology of the
network immediately around it. To view the device's routing status for IPv4 and IPv6, click Status and
Statistics > Route Table.
IPv4 and IPv6 Routes
• Destination – IP Address and subnet mask of the connection.
• Next Hop – IP address of the next hop.
• Hop Count – Number of intermediate devices (like routers) through which data must pass between the
• Interface – Name of the interface to which the route is attached to.
• Source – Source of the route.

DHCP Bindings

The DHCP Bindings page displays the IP and MAC address, Lease Expire Time and Type of Binding (static
or dynamic). To view the device's DHCP Bindings, click Status and Statistics > DHCP Bindings. Select a
hostname from the list and click Add to Static DHCP to add the binding to the binding table. Click the refresh
icon to refresh the data in the binding table.
In the DHCP Binding Table, the following is displayed:
• Hostname – Name of host.
• IPv4/IPv6 Address – Assigned IP address for IPv4 or IPv6.
• MAC Address – The MAC address of the client's assigned IP address.
• Lease Expires – Lease time for the client's system.
source and the destination.
Routing Table
RV260x Administration Guide
17