Table of Contents
Advertisement
Wireless-N Gigabit Router with Storage Link
Show Routing Table. Click the Show Routing Table button to open a screen displaying how data is routed
through your local network. For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface
are displayed. Click the Refresh button to update the information. Click the Close button to exit this screen.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. Help information is available on the right side of the
screen.
Figure 5-13: Routing Table
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
21
The Setup Tab - Advanced Routing
Advertisement
Table of Contents
