Gigaset N870 IP PRO Installation, Configuration And Operation page 39

¤
On the right side below the list select the maximum number of entries that should be
displayed on a page (10, 25, 50, 100).
Browsing through the list
If there are more list entries than the selected number, you can browse through the whole table
page by page. The number of pages is shown below the list. The current page is highlighted.
¤
Click on Previous or Next to scroll through the list page by page.
¤
Click on a specific page number, to go to the desired page directly.
Pending base stations
The Pending base stations list shows the automatically recognised DECT base stations in the
network that have not yet been registered. If a base station is detected by several DECT
manages, there are several entries for one base station. To integrate them into your DECT multi-
cell system, they need to be confirmed and activated.
The base stations are identified by their MAC address.
You can filter the list of pending base stations by specific DECT managers to get the list shorter
and to add the base stations DECT manager by DECT manager.
Assigning a base stations to your DECT manager
¤
Click on in the row of the base station you want to add to your system . . . the data page
for the base station is opened.
The relation to a DECT manager cannot be edited and changed. To assign a base
station to another DECT manager:
¤
Delete it from the Connected base stations list . . . The base station is displayed
again in the Pending base stations list, with one entry for each DECT manager
that is detecting it on the DECT network.
¤
Select the base station entry of the desired DECT manager and add it to the
system.
Adding/Editing base stations
On this page you enter the data for a base station to be added to the DECT manager or edit the
data for a base station that is already assigned to the DECT manager.
The following information is displayed and cannot be changed:
MAC address
Hardware address of the base station. With this address the device can be uniquely identified
within the Ethernet. It cannot be changed
DM Name
Name of DECT manager the base station belongs to. local: The base station belongs to the
configuring device.
Base stations
39