Table of Contents
Advertisement
SMA America, LLC
10. Unhook the front plate of the enclosure by pulling it
upwards.
11. Move the front plate for approximately 8 in.
(200 mm) and hold it with 2 hands.
12. Remove the ground strap from the bottom left
corner of the front plate.
13. Remove the front plate.
5.4 Preparation of the cable entries
Figure 12: Position of the cable entries for both AC cables and DC cables
Installation Guide
5 Installation of the Disconnect Unit
D IS C
O N N
E C T U
N IT
SM A
DisconACDC_SCUS-IUS103110
27
Advertisement
Table of Contents
