Hartridge HK900 Operating Manual page 7

HARTRIDGE LIMITED
HL030(EN), Issue 1, June 2005
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
Remove any tools, cleaning rags or other debris from the test stand before starting
up. Make sure the inching bar is not fitted to the test stand before starting up.
There must be no naked flames. Potentially flammable vapours are present in the
test stand and ignition is possible although unlikely. Smoking whilst operating the
equipment is strictly forbidden.
Accidents can occur to unauthorised personnel during testing. Untrained person(s)
must not be present in the test area when the equipment is operating. Only
qualified personnel are to operate this equipment.
Ensure good levels of lighting for safe, efficient equipment operation.
Operating Manual
5