Viewing And Printing Saved Results - Hartridge HK900 Operating Manual

Operating Manual
To edit a testplan, load it into the main screen then simply change the required demand values or
limits (by clicking in the appropriate box). Step names can also be changed using the [Edit Name]
button.
NOTE: We advise you NOT to change the example testplans supplied as this will maintain a
consistent base to refer back to if needed. Rather, create a copy of the example plan using
the [New] button as described above, and then make the required changes to this new
testplan.
To save the changes, open the Testplan Menu then click [Save Testplan].
NOTE: You are not able to create, edit, or delete Manufacturer information as this is restricted
access.

4.6 Viewing and Printing Saved Results

To view or print previously saved results press F5 [View Results]. This opens a dialog with a drop-
down list of previously saved results files. Select the required results file and press [OK]; the software
will load it into the main screen.
The appearance of the results viewing screen is slightly different from the live data screen; most of
the functions/areas are disabled (greyed out) as shown below. The results file information in the top
left of the screen shows the date and time saved, the results filename and any comments saved with
the results.
You can use the drop-down test step list to view the results from each test step (it also shows the
demands and limits for that test step). You can print the results using F7, or return to the live data
screen by pressing F5 [View Live].
24
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
Figure 4.8: Injector Screen in Results View
HARTRIDGE LIMITED
HL030(EN), Issue 1, June 2005