Table of Contents
Advertisement
Initial start-up and functions
1 USB Input
Connect
your
personal
be downloaded from the Audiotec Fischer website
Please note: It is not possible to connect any USB
2 Control Input
This multi-functional input is designed for HELIX
V EIGHT DSP accessory products like a remote
software.
3 Control pushbutton
The Control pushbutton allows the user to switch
between the two setup memory positions. To switch
between the setups the button has to be pressed
and held for 1 second. Switching is indicated by
button for 5 seconds completely eras es the internal
the Status LED.
Attention: After erasing the setups from memory
the HELIX V EIGHT DSP will not reproduce any au-
dio output.
4 Status LED
The Status LED
setup. Green means that setup 1 is load ed, orange
dicates that no setup is loaded. In that case please
the LED starts blinking orange, the internal tem-
er will be reduced to lower the temperature of the
shut down until it has reached a safe temperature
5 Optical Input
Optical input in SPDIF format for connecting signal
sources with a digital audio output. The sampling
rate of this input must be between 12 and 96 kHz.
The input signal is automatically adapted to the in-
computer
to
the
.
Status LED. Pressing the
this input, we recommend to use an optional remote
control.
Notice:
signals and no Dolby-coded digital audio stream.
6 Highlevel Input
10 Volts with control 9 (Input Sensitivity
-
range can be changed to 10 - 20 Volts.
der to guarantee a perfect operation in combination
of 10 - 20 Volts.
Attention: Solely use the pluggable screw-terminal
the HELIX accessory assortment!
Important: It is strictly forbidden to use the High-
level Input
7 Line Input
-
-
8 Clipping LED
or Highlevel Inputs
using the control 9 (Input Sensitivity
goes out.
-
-
-
-
Line Input
Line Inputs
17
Hide quick links:
Advertisement
Table of Contents
