Safety Recommendations; Package Contents - Cisco ATA 191 Administration Manual

Safety Recommendations

Safety Recommendations
To ensure general safety, follow these guidelines:
• Do not get this product wet or pour liquids into this device.
• Do not open or disassemble this product.
• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
• Use only the power supply that comes with the ATA.
• Ultimate disposal of this product should be handled according to all national laws and regulations.
• Read the installation instructions before you connect the system to its power source.
• The plug-socket combination must always be accessible because it serves as the main disconnecting
• Do not work on the system or connect or disconnect cables during periods of lightning activity.
• To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
For translated warnings, see the Regulatory Compliance and Safety Information for the Cisco ATA 191
document.

Package Contents

The ATA 191 package contains the following items:
• Cisco ATA 191 Analog Telephone Adapter
• Regulatory Compliance and Safety Information for the ATA 191
• 5V power adapter with appropriate country clip
• Ethernet cable
Install Your Cisco ATA
You can use either Category 3/5/5e/6 cabling for 10-Mbps connections, but you must use Category 5/5e/6 for
100-Mbps connections.
Cisco ATA 191 Analog Telephone Adapter Administration Guide for Cisco Unified Communications Manager
2
device.
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.
The ATA is intended for use only with the 5V DC power adapter that comes with the
Note
unit.
Install the ATA 191