Safety Guidelines - Cisco WAE-INLN-4CG Series Manual

Safety Guidelines

Warnings
Warning
Warning
Warning
Warning
Warning
OL-12480-03
Get user manuals: See SafeManuals.com
Table 2 Inline Network Adapter Specifications
Specification
Operating humidity
Operating temperature
Storage temperature
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the
following precautions:
• Warnings
General Precautions
•
Protecting Against Electrostatic Discharge
•
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
The safety cover is an integral part of the product. Do not operate the unit without the safety cover
installed. Operating the unit without the cover in place will invalidate the safety approvals and pose
a risk of fire and electrical hazards. Statement 117
Blank faceplates (filler panels) serve three important functions: they prevent exposure to hazardous
voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might
disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate
the system unless all cards and faceplates are in place. Statement 156
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Description
0 to 90%, noncondensing
o o
32 to –122 F (0 to 50 C)
o o
–4 to –149 F (–20 to –65 C)
Installing the Cisco WAE Inline Network Adapter
Safety Guidelines
5