Parker KarryFlare Operating Manual

Parker KarryFlare Operating Manual

Portable flaring device for triple-lok fittings
Hide thumbs Also See for KarryFlare:

Advertisement

KarryFlare - Operating Manual
KarryFlare
Portable flaring device for Triple-Lok fittings
For your safety!
Under certain circumstances, tube fittings can be subjected to extreme
loadings such as vibration and uncontrolled pressure peaks. Only by using
genuine Parker Components and following Parker assembly instructions can
you be assured of the reliability and safety of the products and their conformity
to the applicable standards.
Failure to follow this rule can adversely affect the functional safety and
reliability of products, cause personal injury, property damage, and result in
loss of your guarantee rights.
© Copyright 2004, Parker Hannifin Corporation. All Rights Reserved.
Subject to alteration.
1
Page 2
Page 2
Page 3
Page 4
Page 5
Page 6-8
Page 9
Page 10
Page 10
Page 10
Page 11-13
OM/4047-T1/UK

Advertisement

Table of Contents
loading

Summary of Contents for Parker KarryFlare

  • Page 1: Table Of Contents

    Under certain circumstances, tube fittings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. Only by using genuine Parker Components and following Parker assembly instructions can you be assured of the reliability and safety of the products and their conformity to the applicable standards.
  • Page 2: For Your Safety

    The KarryFlare consists of a hydraulic flaring unit and a hand pump. The hydraulic assembly pressure can be read on a gauge which is ergonomically located. The KarryFlare is ideal for tube flaring of small quantities and on-site tube installation. It is practical, simple to operate, reliable and easy to transport.
  • Page 3: Ordering

    G Hydraulic oil : H-LP32 – 1.2l 3. Ordering KarryFlare device and accessories Description Order Code KarryFlare Manual flaring device KarryFlare including handpump, carrying case and manual, tank filled with hydraulic oil, 37° flaring pin installed. Flaring dies "M15" must be ordered separately. KARRYFLARE Accessoires...
  • Page 4: Initial Operation

    G Take care that the machine cannot slip away at assembly. It might be necessary to support the machine when flaring large diameter tubes G Take care that only actual Parker flaring dies are used. G Make sure that die sets and flaring pin are clean and free of wear or damage.
  • Page 5 KarryFlare - Operating Manual G Unlock transportation clip from hand pump lever. G Do some test flarings to familiarise with the operation and the tool handling. G Carefully check the flaring result according to the Triple-Lok assembly ® instructions. OM/4047-T1/UK...
  • Page 6: Operation

    KarryFlare - Operating Manual ® 5 Operation of KarryFlare and assembly of Triple-Lok OM/4047-T1/UK...
  • Page 7 KarryFlare - Operating Manual OM/4047-T1/UK...
  • Page 8 KarryFlare - Operating Manual OM/4047-T1/UK...
  • Page 9: Transport

    KarryFlare - Operating Manual KARRYFLARE ..........07/2004 Tube-OD Triple-Lok, P [bar] Ø[mm] - Ø[Inch] 5/16 1 1/4 1 1/2 KARRYFLARE/CHART 6 Transport G For transportation the oil refill screw has to be closed and the hand lever has to be locked.
  • Page 10: Maintenance

    G Refer to TFDE handbook 4100 for assembly instructions of EO PSR / DPR / EO2 or Triple-Lok fittings ® The bite-type assembly block of the EO Karrymat and the flaring block of the KarryFlare can also be used as individual tools without the basic frame. Following guidelines apply for this: OM/4047-T1/UK...
  • Page 11: Drawings And Parts List

    G If other accessory parts or driving units are used, warranty is limited to genuine Parker components. G Alterations on EO Karrymat / KarryFlare devices may result in incorrect assemblies. Parker is not liable for product failures due to wrong assembly.
  • Page 12 KarryFlare - Operating Manual KARRYFLARE/T25X8 Tube 25x8 Alu KARRYFLARE/RHOLD Roller Holder KARRYFLARE/THOLD Tube Holder KARRYFLARE/TPLATE Type Plate KARRYFLARE/STICKER Sticker KARRYFLARE KARRYFLARE/TSTICK Transport Sticker KARRYFLARE/HINGE Hinge 4.008530 (R+K) KARRYFLARE/NUT Nut 32x32x10xM10 KARRYFLARE/BUFFER Buffer Ø40x30 hole M8 KARRYFLARE/WHEEL Skater wheel 64x24x6mm GZ12SCF...
  • Page 13 KarryFlare - Operating Manual Partslist KARRYFLARE/BLOC Item. Qty. Partnumber Description KARRYFLARE/BODY Body KARRYFLARE/CYLD Cylinder KARRYFLARE/PISTON Piston KARRYFLARE/CLAP Clap KARRYFLARE/SFRAME Sliding Frame KARRYFLARE/PLATE Stop Plate KARRYFLARE/TSTOP Tube Stop KARRYFLARE/GSCREW Guide Screw KARRYFLARE/CHART Pressure Chart KARRYFLARE/FPINX Flaring Pin KARRYFLARE/PSPRING Spring D-345 (Gutekunst)

Table of Contents